Correct Answer:

See Explanation below for all solution
Explanation:
Task 7: Restrict the Custom Business Role for US / 1710 and Mark All Other Fields as Not Maintained Objective The purpose of this task is to maintain the restriction values of the custom business role created in the previous task so that project managers only have the minimum access required for their work in the United States.
This task is performed on the custom business role created from the template:
Template Role: SAP_BR_PROJECT_MANAGER_PROF
Custom Role Example Pattern: BR_PROJECT_MANAGER_PROF_US_######
The task requires you to:
maintain only the listed restriction fields,
enter the exact required values for US and 1710,
set all other restriction fields to Not Maintained,
and save the role.
Business Scenario Explanation
This restriction setup is what makes the new custom role safe and fit for purpose.
The business requirement says that end users:
are project managers based in the United States,
should only access relevant US project data,
should not be able to staff or work outside the intended scope,
should only see and maintain data for the allowed organizational scope.
This is achieved by limiting the role to:
US for country-related fields
1710 for company / organizational fields
Everything else must be Not Maintained so that unnecessary access is not left open.
Important Notes
Replace ###### with the last 6 digits of your group number.
Use the values exactly as shown.
Maintain only the fields listed in the table.
Set all other restriction fields to Not Maintained.
Do not leave unrelated fields blank while still restricted.
Restricted + blank is usually wrong.
Not Maintained is the correct setting for all unrelated fields.
Required Restriction Values
Use the following values exactly as shown in your task screenshot.

That means:
Country restriction = US
Org/company restrictions = 1710
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to the system.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is where the custom role was created in the previous task and where its restrictions are maintained.
Step 2: Open your custom Project Manager US role
In Maintain Business Roles:
Search for your custom role.
Open the role with ID pattern:
BR_PROJECT_MANAGER_PROF_US_######
Example
If the suffix is 000457, then the role is:
BR_PROJECT_MANAGER_PROF_US_000457
Explanation:
You must open the custom role, not the standard SAP template role.
The restrictions belong to the derived custom role only.
Step 3: Confirm the correct custom role is open
Check the role details and confirm:
the business role ID matches your custom role,
the description matches the US-specific project manager role,
the role is based on template SAP_BR_PROJECT_MANAGER_PROF.
Explanation:
This avoids accidentally changing the wrong role.
Step 4: Click "Maintain Restrictions"
On the custom role page:
Click:
Maintain Restrictions
Explanation:
This opens the detailed restriction maintenance area where access categories and field-level values are controlled.
Step 5: Set the access categories for restriction maintenance
On the restriction page, ensure the access categories are maintained as required for the role.
During your run, these categories were maintained as restricted so values could be entered for the listed fields.
Explanation:
Restriction values can only be maintained correctly when the role is in the right restriction mode.
This step prepares the role so the listed fields can be populated with US / 1710 values.
Step 6: Understand the rule before entering values
This task uses a strict rule:
Keep maintained
Only the fields explicitly listed in the table should be maintained with values.
Set to Not Maintained
Every other restriction field not listed in the table must be marked:
Not Maintained
Explanation:
This is the most important logic in the whole task.
If a field is unrelated and still left as restricted or blank, it can cause validation problems or give more access than intended.
Part A: Maintain the required restriction fields
Step 7: Maintain Bank Country/Region Key
Search for:
Bank Country/Region Key
Then maintain:
Read, Value Help = US
Value Help = US
Explanation:
This ensures the user can only read and search bank-related values for the United States.


Step 8: Maintain Company Code
Search for:
Company Code
Then maintain:
Write, Read, Value Help = 1710
Read, Value Help = 1710
Do not maintain an extra standalone Value Help entry for Company Code unless the task explicitly requires it.
Explanation:
The task table does not include a standalone Company Code Value Help line.
So only the listed two Company Code restriction types should contain 1710.


Step 9: Maintain Purchasing Organization
Search for:
Purchasing Organization
Then maintain:
Write, Read, Value Help = 1710
Read, Value Help = 1710
Value Help = 1710
Explanation:
This ensures all purchasing-organization-related access for the role is limited to organizational value 1710.
Step 10: Maintain Valuation Area
Search for:
Valuation Area
Then maintain:
Read, Value Help = 1710
Value Help = 1710
Explanation:
This limits valuation-related access to the intended organizational scope.
Part B: Set all other fields to Not Maintained
Step 11: Search through the other restriction fields
After entering the required fields, review the remaining restriction objects.
Examples from your run included fields such as:
Accounting Principle
Authorization Group for Business Partners
Billing Type
and many other unrelated restriction fields
Explanation:
These fields were not listed in the task table, so they must not stay restricted.
Step 12: Mark unrelated fields as Not Maintained
For each field not listed in the required table:
Open the field setting / restriction dialog.
Choose:
Not Maintained
Important examples
From your run:
Accounting Principle → Not Maintained
Authorization Group for Business Partners → Not Maintained
Billing Type → Not Maintained
Explanation:
These fields are outside the required US / 1710 restriction list.
If you leave them restricted without a required value, the setup is incorrect.
Step 13: Do not mark the listed fields as Not Maintained
The following must stay maintained with values because they are in the required table:
Bank Country/Region Key
Company Code
Purchasing Organization
Valuation Area
Explanation:
Only the unrelated fields become Not Maintained.
The listed fields must remain restricted with the required values.
Step 14: Save the role
After all required fields are maintained and all other fields are marked Not Maintained:
Click Save
Explanation:
This finalizes the role restrictions.
Without saving, the restriction changes remain incomplete.
Step 15: Verify the restriction result
After saving, verify that:
required fields contain US and 1710 exactly as defined,
unrelated fields are no longer restricted,
the role saves without error.
Explanation:
This is your final proof that the restricted custom role has been completed correctly.
Expected Result
After the task is completed successfully:
the custom role remains based on SAP_BR_PROJECT_MANAGER_PROF,
required US / 1710 restriction fields are maintained,
all unrelated restriction fields are marked Not Maintained,
the role is saved successfully,
the role now reflects minimum necessary access for US-based project managers.

Correct Answer:

See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to assign the required business catalogs to the custom all-employee business role created in the previous task. These catalogs provide the applications that will later be shown in the launchpad space and page for all employees.
The catalogs that must be assigned are:
HCM - Employee Self Service
SAP_HCM_BC_EMP_PC
Concur - Employee Self-Service
SAP_CON_BC_CTE_ESS_PC
Business Scenario Explanation
In the previous task, you created a new custom all-employee business role, for example:
Z_EMPLOYEES_ALL_######
That role exists, but on its own it does not yet provide app access.
In SAP S/4HANA Cloud, app access is granted through business catalogs.
This means the role must now be connected to the catalogs that contain the apps employees need.
Later, these catalogs will feed the launchpad page content so end users can easily find the relevant applications.
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact catalog names and IDs.
Assign both required catalogs.
Save the role after assignment.
Do not assign the wrong catalog variant.
Required Catalogs
Assign exactly these two business catalogs:
Business Catalog
Business Catalog ID
HCM - Employee Self Service
SAP_HCM_BC_EMP_PC
Concur - Employee Self-Service
SAP_CON_BC_CTE_ESS_PC
Detailed Step-by-Step Procedure
Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to maintain business roles, assign catalogs, assign launchpad spaces, and maintain restrictions.
Step 2: Search for your custom all-employee business role
Inside Maintain Business Roles:
Search for your business role ID:
Z_EMPLOYEES_ALL_######
Example
If your suffix is 000013, search for:
Z_EMPLOYEES_ALL_000013
Open the role.
Explanation:
You must open the custom all-employee role created in the previous task, not a template role and not a standard SAP role.

Step 3: Verify the correct role is open
Confirm that the role details show:
Business Role ID = Z_EMPLOYEES_ALL_######
Business Role Description = All Employee Role ######
Explanation:
This ensures you are assigning catalogs to the correct business role.
Step 4: Go to the "Business Catalogs" tab
Inside the role:
Click the tab:
Business Catalogs
Explanation:
This tab is used to assign the business catalogs that define which apps and app authorizations the role provides.
Step 5: Click Add
In the Assigned Business Catalogs section:
Click Add
This opens the dialog:
Add Business Catalogs
Explanation:
The Add popup is used to search for and assign SAP-delivered business catalogs to the custom role.
Step 6: Search for the first catalog
In the Add Business Catalogs popup:
Search for:
SAP_HCM_BC_EMP_PC
or
HCM - Employee Self Service
Select:
HCM - Employee Self Service
Business Catalog ID: SAP_HCM_BC_EMP_PC
Explanation:
This catalog provides employee self-service apps and is required by the task.

Step 7: Search for the second catalog
Still in the Add Business Catalogs popup:
Search for:
SAP_CON_BC_CTE_ESS_PC
or
Concur - Employee Self-Service
Select:
Concur - Employee Self-Service
Business Catalog ID: SAP_CON_BC_CTE_ESS_PC
Explanation:
This catalog provides the Concur employee self-service content and is also explicitly required by the task.
Step 8: Add the selected catalogs
After selecting both catalogs:
Click OK or Apply
Explanation:
This adds the selected catalogs to the custom role in draft mode.
Step 9: Verify both catalogs are listed
Back in the Business Role screen, verify that both assigned catalogs are visible:
SAP_HCM_BC_EMP_PC
SAP_CON_BC_CTE_ESS_PC
Explanation:
This confirms that the required app authorizations have now been attached to the role.
Step 10: Save the role
Click:
Save
Explanation:
This finalizes the catalog assignment.
Without saving, the catalogs remain only in draft and the role will not provide the required app content.
Step 11: Verify the result after save
After saving, check again that the role still shows both business catalogs in the assigned list.
Explanation:
This confirms the task was completed successfully and the role is ready for the next step, which is launchpad space/page content.
Expected Result
After this task is completed successfully:
the custom all-employee role has both required business catalogs assigned, the role is saved successfully, the role now provides the app authorizations required for employee self-service content, the launchpad page can later use these catalogs to add the required tiles.