Accurate Hot Selling SCP-NPM Exam Dumps 2024 Newly Released
Get 100% Authentic SolarWinds SCP-NPM Dumps with Correct Answers
NEW QUESTION # 40
You want to create a custom poller for a device. When you select the OID you get an "OID not supported" error. What does this mean?
- A. The SNMP string that you used is incorrect
- B. Your firewall is blocking SNMP requests
- C. This OID requires the read/write community string
- D. The SNMP agent on the device does not report on this OID
Answer: D
NEW QUESTION # 41
What is required to monitor tenants in your SDN environment with NPM Cisco ACI monitoring? (Choose all that apply.)
- A. Enable API polling on the APIC node
- B. Enable API polling on all ACI devices
- C. Add an APIC node to NPM
- D. View your SDN environment in Orion Maps
Answer: B,C
NEW QUESTION # 42
Status, Average Response Time, and Packet Loss are the only node details data you can view for your switch A device. The node details of your identical switch B device show Status, Average Response Time, and Packet Loss and other statistics. How can you monitor the other statistics on switch A and not lose any historical data?
- A. Edit the node properties of switch A and change the polling method to "Status Only: ICMP"
- B. Edit the node properties of switch B and change the polling method to "Status Only: ICMP"
- C. Edit the node properties of switch A and change the polling method to "Most Devices: SNMP and ICMP"
- D. Add switch A again without deleting it first, and this time choose "Most Devices: SNMP and ICMP" as the polling method
- E. Delete switch A, and then add it again and this time choose "Most Devices: SNMP and ICMP" as the polling method
Answer: D
NEW QUESTION # 43
What is required of your nodes to detect duplex mismatches? (Choose all that apply.)
- A. Unify the duplex mode configuration on neighboring interfaces
- B. Duplex of both devices must be identified as full or half
- C. The nodes must support topology and be interconnected
- D. Ensure corresponding values for each interface are different
Answer: B,D
NEW QUESTION # 44
Which statistic should you use to determine peak network traffic?
- A. Network latency
- B. Packet loss
- C. Bandwidth usage
- D. Protocol distribution
Answer: C
NEW QUESTION # 45
You want a user to be able to acknowledge alerts. Which permissions do you assign to the user account?
- A. Allow Account to Unmanage Objects
- B. Allow Node Management Rights
- C. Allow Account to Clear Events and Acknowledge Alerts and Syslogs
- D. Allow Administrator Rights
Answer: C
NEW QUESTION # 46
You want to limit a user to only monitor Windows servers and not be able to view other devices that NPM monitors. How can you do this?
- A. Account limitations
- B. Account views
- C. Alert limitations
- D. View permissions
Answer: D
NEW QUESTION # 47
You run a Network Discovery and discover devices that you do not want to monitor. What feature can you use to exclude those devices from future discoveries?
- A. Discovery Ignore List
- B. Discovery Watch List
- C. Discovery White List
- D. Discovery Trash List
Answer: A
NEW QUESTION # 48
You receive traps from your network devices and want to alert on a select message. How do you accomplish this?
- A. You cannot alert on traps through the Orion Platform
- B. Go to the Traps view and configure a new Log Viewer rule
- C. Use Traps in Orion Alerts to configure the default trap alert to fire on the trap message you select to alert on
- D. Configure Syslog alert actions on the Alert Actions tab
Answer: C
NEW QUESTION # 49
You added a device for NPM to monitor. You can see CPU and memory statistics, but want to see a statistic that NPM does not support out of the box. Which features can you use to collect the statistics you want from the device? (Choose all that apply.)
- A. Application monitor templates
- B. Device templates
- C. Universal Device Pollers (UnDP)
- D. Manage Pollers in Device Studio
Answer: A,C,D
NEW QUESTION # 50
How many days of data must your database contain in order to see Capacity Forecast Charts in NPM?
- A. 1 Day
- B. 7 Days
- C. 5 Days
- D. 3 Days
Answer: B
NEW QUESTION # 51
You need to add a new subnet of 500 devices for monitoring. What is the first step to incorporate these devices into NPM?
- A. Perform a Network Discovery
- B. Measure network-wide bandwidth consumption
- C. Collect NetFlow from a core router
- D. Add the nodes using the Add Node feature in Manage Nodes
Answer: A
NEW QUESTION # 52
Users report that NPM performance is slow when managing devices through the Orion Web Console. You verify the SNMP trapping is responsible for the poor performance. How do you resolve this issue?
- A. Add the devices as managed nodes to cut down on the trap messages received
- B. Point the devices to a trap manager and filter unwanted messages before forwarding remaining traps to the Orion Platform
- C. Add an Additional Web Server to handle the load of users accessing the NPM Orion Web Console
- D. Reduce the number of days SNMP messages are kept in the SolarWinds Trap Viewer
Answer: B
NEW QUESTION # 53
Network performance over an inter-campus Ethernet link is slow. One side of the connection is experiencing a high number of packet drops. What information in NPM can you review to help discover the cause of the issue?
- A. Packet loss on the nodes on either side of the connection
- B. Possible Duplex Mismatches
- C. MTU of each side of the link
- D. Routing tables on each side of the link
Answer: B
NEW QUESTION # 54
Which is the best way to monitor an SNMP metric that NPM is not monitoring out-of-the-box?
- A. Enable CLI polling
- B. Create a custom poller
- C. Node Management utility
- D. Update the SolarWinds MIB database
Answer: B
NEW QUESTION # 55
The Universal Device Poller retrieves management data in which format?
- A. WMI
- B. ANSI 1
- C. OID
- D. XML
Answer: C
NEW QUESTION # 56
......
Dumps of SCP-NPM Cover all the requirements of the Real Exam: https://passleader.briandumpsprep.com/SCP-NPM-prep-exam-braindumps.html
