[Jul 26, 2026] Download Free Hitachi HQT-4180 Real Exam Questions
Pass Your Exam With 100% Verified HQT-4180 Exam Questions
NEW QUESTION # 34
A customer has a VSP G370 with the encryption license key installed. They now want to have all the DP-Volumes of a certain pool located on encrypted RAID Groups.
What are two requirements? (Choose two.)
- A. The controller board must support encryption.
- B. At least 20 GB of Shared Memory must be installed.
- C. The RAID level of RAID Groups in the pool must be RAID 6.
- D. The RAID Groups in the pool must be formatted with encryption enabled.
Answer: A,D
NEW QUESTION # 35
Which three RAID configurations are supported by VSP Midrange systems? (Choose three.)
- A. 8D + 1P
- B. 7D + 1P
- C. 4D + 1P
- D. 10D + 2P
- E. 2D + 2D
Answer: A,C,D
NEW QUESTION # 36
You need to upgrade the firmware on a VSP G700.
Which file must you select to perform the upgrade using the Maintenance Utility?
- A. HA-MPC-xx.iso
- B. All Firmware.mda
- C. HA-SVP-xx.iso
- D. setup.exe
Answer: C
NEW QUESTION # 37
Which tool monitors a VSP E590 system and reports System Information Messages (SIMs)?
- A. Storage Navigator
- B. Hitachi Ops Center Protector
- C. Hitachi Remote Ops SVP Agent
- D. Hitachi Remote Ops Monitor Agent
Answer: D
NEW QUESTION # 38
What are two supported SAS back-end transfer speeds on the VSP Midrange systems? (Choose two.)
- A. 12 Gb/s
- B. 8 Gb/s
- C. 4 Gb/s
- D. 6 Gb/s
Answer: A,D
NEW QUESTION # 39
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answers
- A. upgrading from G200 to G600
- B. adding a DB60 drive tray
- C. adding a DKB
- D. upgrading from G200 to G800
Answer: B,C
NEW QUESTION # 40
A customer wants to upgrade their VSP E790 with a SAS Expansion feature. What are three requirements? (Choose three.)
- A. The SAS Expansion license has to be installed.
- B. Two additional Disk Boards (DKBs) have to be installed.
- C. Drive Boxes (DBs) with SAS interface have to be added.
- D. In Shared Memory, the Extension1 has to be enabled.
- E. Slots B of both controllers must be available for DKB installation.
Answer: B,C,E
Explanation:
The VSP E790/E590 is a 2U single-chassis storage system with an internal drive enclosure for up to 24 NVMe SSDs.
The maximum supported capacity for a single NVMe SSD is 30TB, so up to 720TB can be installed in the system.
Depending on the RAID level and the number of spares configured, the usable capacity may be less.
The SAS Expansion feature provides the customer with flexibility in terms of capacity and tiering.
Based on two SAS Disk Boards (DKBs) mounted in Slot B of both controllers, certain numbers of external SAS Drive Boxes can be added.
Drive Boxes are offered for 3.5" NL-SAS drives and for 2.5" SAS HDDs and SSDs.
NEW QUESTION # 41
Which two statements are correct when adding cache to a VSP One B24? (Choose two.)
- A. This is a disruptive procedure that cannot be performed online.
- B. Cache modules must be installed in CMG1
- C. Cache Modules must be installed on the CM board
- D. CMG0 and CMG1 must use the same DIMM type
Answer: C,D
NEW QUESTION # 42
A customer wants to upgrade a VSP E1090 to 1TB RAM capacity.
What is the valid Cache Flash Memory (CFM) configuration?
- A. two BM65 per controller
- B. one BM70 per controller
- C. two BM70 per controller
- D. two BM65 per system
Answer: C
NEW QUESTION # 43
Which manual should be used when performing maintenance actions on VSP midrange storage systems?
- A. Product Documentation Library
- B. Service Guide
- C. Maintenance Manual
- D. Administrator Guide
Answer: C
NEW QUESTION # 44
Which two actions can be performed with Hitachi Ops Center Administrator? (Choose two.)
- A. Manage virtual storage machines.
- B. Configure the Hitachi Remote Ops Monitor Agent.
- C. Perform Self-Service Maintenance.
- D. Manage multiple VSP Midrange storage systems.
Answer: B,C
NEW QUESTION # 45
A VSP Е1090 customer wants to add another rack with Drive Boxes, however the new rack cannot be installed side-by-side with the controller rack. You plan to order SAS optical cables to connect the two racks together.
Which three cables lengths are available (in meters)? (Choose three.)
- A. 100m
- B. 5m
- C. 50m
- D. 30m
- E. 10m
Answer: C,D,E
NEW QUESTION # 46
What is the recommended RAID level when creating a Hitachi Dynamic Provisioning (HDP) pool?
- A. RAID 5
- B. RAID 1
- C. RAID 6
- D. RAID 1+0
Answer: C
NEW QUESTION # 47
Which program is used to perform the "New Installation" procedure on a VSP midrange system?
- A. BECK
- B. MPC
- C. GUM
- D. Webconsole
Answer: B
NEW QUESTION # 48
You have just installed and configured two new VSP One B26 systems. The customer has the Hitachi Ops Center suite for managing all their VSP systems.
Which software tool should they use to register the new B26 systems so they could start administering them?
- A. Hitachi Storage Advisor Embedded
- B. Hitachi Ops Center Administrator
- C. Hitachi VSP One Block Administrator
- D. Webconsole
Answer: B
NEW QUESTION # 49
From which two locations can the Maintenance Utility be invoked on a VSP One B26? (Choose two.)
- A. VSP One Block Administrator
- B. Hitachi Remote Ops Monitor Agent
- C. MPC connected to the Maintenance LAN port on the array
- D. SVP Web Console
Answer: C,D
NEW QUESTION # 50
You need to replace a broken fan in the Backup Module with Fan BKMF21 on a VSP E1090.
What is the correct procedure?
- A. Use the Maintenance Utility for stopping the fan, then replace it.
- B. Use the MPC to remove the power from the backup module, and when the fan has stopped replace it.
- C. Use Storage Navigator to put the Backup Module into replacement mode, then replace the fan.
- D. Go directly to the system and replace the faulty fan.
Answer: C
NEW QUESTION # 51
Which two actions can be performed with Hitachi Ops Center Administrator? (Choose two.)
- A. Perform Self-Service Maintenance.
- B. Manage multiple VSP Midrange storage systems.
- C. Manage virtual storage machines.
- D. Configure the Hitachi Remote Ops Monitor Agent.
Answer: B,C
NEW QUESTION # 52
You have to perform a firmware update containing new code for DKCMain, CHBs and drives on a VSP G900.
What are two requirements? (Choose two.)
- A. The Microprocessor utilization should be below 50%.
- B. There should be no sparing processes running in the background.
- C. The CHBs must be updated first.
- D. The Cache Write Pending rate should be below 30%.
Answer: B,C
NEW QUESTION # 53
A customer has a VSP G370 with the encryption license key installed. They now want to have all the DP-Volumes of a certain pool located on encrypted RAID Groups. What are two requirements? (Choose two.)
- A. The controller board must support encryption.
- B. At least 20 GB of Shared Memory must be installed.
- C. The RAID level of RAID Groups in the pool must be RAID 6.
- D. The RAID Groups in the pool must be formatted with encryption enabled.
Answer: A,D
NEW QUESTION # 54
......
Hitachi Vantara VSP Midrange Family of enterprise storage solutions is a comprehensive storage system that offers superior functionality and performance. The VSP Midrange Family has been designed specifically to handle the challenges and requirements of modern enterprise storage, and is suitable for use in large and small organizations, across a wide range of industries.
HQT-4180 Dumps 100 Pass Guarantee With Latest Demo: https://passleader.briandumpsprep.com/HQT-4180-prep-exam-braindumps.html
