Positive Aspects of Valid Dumps 300-715 Exam Dumps! [Jan-2024]
First Attempt Guaranteed Success in 300-715 Exam 2024
Policy Enforcement: The next part requires that the applicants have the abilities to perform the following tasks:
- Setting wireless and wired 802.1X networking access
- Setting 802.1X phasing deployment
- Setting policies such as authentication and authorization profiles
- Setting native LDAP as well as AD
Cisco 300-715 certification exam is designed for professionals who want to prove their knowledge and skills in implementing and configuring Cisco Identity Services Engine (ISE). Implementing and Configuring Cisco Identity Services Engine certification is ideal for those who are responsible for deploying and managing network security policies and want to validate their expertise in this field. 300-715 exam tests the candidate's ability to configure and implement Cisco ISE solutions to secure network access and enforce policies.
Cisco 300-715 exam is designed to test the knowledge and skills of IT professionals who have experience implementing and configuring Cisco Identity Services Engine (ISE). 300-715 exam is one of the requirements for earning the Cisco Certified Network Professional (CCNP) Security certification. Candidates who successfully pass 300-715 exam will demonstrate their ability to implement and configure ISE for secure network access control.
NEW QUESTION # 46
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. dot1x system-auth-control
- B. ip device tracking
- C. radius server vsa sand authentication
- D. radius-server attribute 8 include-in-access-req
- E. aaa authorization auth-proxy default group radius
Answer: C,D
NEW QUESTION # 47
A Cisco ISE server sends a CoA to a NAD after a user logs in successfully using CWA Which action does the CoA perform?
- A. It applies the downloadable ACL provided in the CoA
- B. It applies new permissions provided in the CoA to the client session.
- C. It terminates the client session
- D. It triggers the NAD to reauthenticate the client
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.html
NEW QUESTION # 48
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?
- A. subject alternative name and the common name
- B. MS-CHAFV2 provided machine credentials and credentials stored in Active Directory
- C. user-presented password hash and a hash stored in Active Directory
- D. user-presented certificate and a certificate stored in Active Directory
Answer: A
Explanation:
Explanation
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user.
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html
NEW QUESTION # 49
The default Cisco ISE node configuration has which role or roles enabled by default?
- A. Administration only
- B. Administration and Pokey Service
- C. Policy Service Monitoring, and Administration
- D. Inline Posture only
Answer: C
NEW QUESTION # 50
What is an advantage of using EAP-TLS over EAP-MS-CHAPv2 for client authentication?
- A. EAP-TLS uses multiple forms of authentication, while EAP-MS-CHAPv2 only uses one.
- B. EAP-TLS uses a device certificate for authentication to enhance security, while EAP-MS-CHAPv2 does not.
- C. EAP-TLS secures the exchange of credentials, while EAP-MS-CHAPv2 does not.
- D. EAP-TLS uses a username and password for authentication to enhance security, while EAP-MS-CHAPv2 does not.
Answer: B
NEW QUESTION # 51
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?
- A. Client provisioning
- B. MDM
- C. My devices
- D. BYOD
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html
NEW QUESTION # 52
What happens when an internal user is configured with an external identity store for authentication, but an engineer uses the Cisco ISE admin portal to select an internal identity store as the identity source?
- A. Authentication is redirected to the internal identity source.
- B. Authentication fails.
- C. Authentication is granted.
- D. Authentication is redirected to the external identity source.
Answer: C
NEW QUESTION # 53
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. dot1x system-auth-control
- B. ip device tracking
- C. radius server vsa sand authentication
- D. radius-server attribute 8 include-in-access-req
- E. aaa authorization auth-proxy default group radius
Answer: C,D
NEW QUESTION # 54
An administrator replaced a PSN in the distributed Cisco ISE environment. When endpoints authenticate to it, the devices are not getting the right profiles or attributes and as a result, are not hitting the correct policies. This was working correctly on the previous PSN. Which action must be taken to ensure the endpoints get identified?
- A. Verify that the authentication request the PSN is receiving is not malformed.
- B. Verify that the MnT node is tracking the session.
- C. Verify the shared secret used between the switch and the PSN.
- D. Verify that the profiling service is running on the new PSN.
Answer: D
NEW QUESTION # 55
An administrator is attempting to replace the built-in self-signed certificates on a Cisco ISE appliance. The CA is requesting some information about the appliance in order to sign the new certificate. What must be done in order to provide the CA this information?
- A. Generate the CSR.
- B. Download the CA server certificate.
- C. Download the intermediate server certificate.
- D. Install the Root CA and intermediate CA.
Answer: A
NEW QUESTION # 56
Which command displays all 802 1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?
- A. show authentication sessions interface Gi 1/0/x
- B. show authentication sessions interface Gi1/0/x output
- C. Show authentication sessions
- D. show authentication sessions output
Answer: C
NEW QUESTION # 57
Which two values are compared by the binary comparison function in authentication that is based on Active Directory?
- A. subject alternative name and the common name
- B. user-presented password hash and a hash stored in Active Directory
- C. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory
- D. user-presented certificate and a certificate stored in Active Directory
Answer: A
Explanation:
Section: Policy Enforcement
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/ISE-ADIntegrationDoc/b_ISE- ADIntegration.html
NEW QUESTION # 58
Select and Place
Answer:
Explanation:
NEW QUESTION # 59
An administrator is configuring a Cisco ISE posture agent in the client provisioning policy and needs to ensure that the posture policies that interact with clients are monitored, and end users are required to comply with network usage rules Which two resources must be added in Cisco ISE to accomplish this goal? (Choose two)
- A. AnyConnect
- B. Supplicant
- C. Cisco ISE NAC
- D. PEAP
- E. Posture Agent
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/configure-posture.html
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_configure_client_provisioning.html#task_D1C2E8ECE1D54D259C01BCBF0A5822F1
NEW QUESTION # 60
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The primary node restarts
- B. The primary node becomes standalone
- C. Both nodes restart.
- D. The secondary node restarts.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)
NEW QUESTION # 61
......
Practice LATEST 300-715 Exam Updated 240 Questions: https://passleader.briandumpsprep.com/300-715-prep-exam-braindumps.html
