Reliable and timely refunds

It is our consistent aim to serve our customers wholeheartedly. Our OGEA-102 real exam try to ensure that every customer is satisfied, which can be embodied in the convenient and quick refund process. Although the passing rate of our OGEA-102 training quiz is close to 100 %, if you are still worried, we can give you another guarantee: if you don't pass the exam, you can get a full refund. Yes, this is the truth. As long as you can provide us with a transcript or other proof of your failure, we can refund you the full amount immediately. The goal of our OGEA-102 Exam Questions: TOGAF Enterprise Architecture Part 2 Exam is always to get you through the OGEA-102 exam. If you don't pass, we won't earn you any money. This is what we should do for you as a responsible company.

Immediate use after payment

As the famous saying goes, time is life. Time is so important to everyone because we have to use our limited time to do many things. Especially for candidates to take the OGEA-102 exam, time is very precious. They must grasp every minute and every second to prepare for it. From the point of view of all the candidates, our OGEA-102 training quiz give full consideration to this problem. We can send you a link within 5 to 10 minutes after your payment. You can click on the link immediately to download our OGEA-102 real exam, never delaying your valuable learning time. If you want time - saving and efficient learning, our OGEA-102 Exam Questions: TOGAF Enterprise Architecture Part 2 Exam is definitely your best choice.

Are you still worried about not passing the OGEA-102 exam? Do you want to give up because of difficulties and pressure when reviewing? You may have experienced a lot of difficulties in preparing for the exam, but fortunately, you saw this message today because our well-developed OGEA-102 Exam Questions: TOGAF Enterprise Architecture Part 2 Exam will help you tide over all the difficulties. As a multinational company, our OGEA-102 training quiz serves candidates from all over the world. No matter which country you are currently in, you can be helped by our OGEA-102 real exam. Up to now, our OGEA-102 training quiz has helped countless candidates to obtain desired certificate. If you want to be one of them, please take a two-minute look at our OGEA-102 real exam.

DOWNLOAD DEMO

Superior quality and efficiency

We believe that every customer pays most attention to quality when he is shopping. Only high-quality goods can meet the needs of every customer better. And our OGEA-102 training quiz has such high quality, because its hit rate of test questions is extremely high. Perhaps you will find in the examination that a lot of questions you have seen many times in our OGEA-102 real exam. In addition, the passing rate is the best test for quality of study materials. And we can be very proud to tell you that the passing rate of our OGEA-102 Exam Questions: TOGAF Enterprise Architecture Part 2 Exam is almost 100 %. That is to say, as long as you choose our study materials and carefully review according to its content, passing the OGEA-102 exam is a piece of cake. We're definitely not exaggerating. If you don't believe, you can give it a try.

The Open Group OGEA-102 Exam Syllabus Topics:

The Open Group TOGAF Enterprise Architecture Part 2 Sample Questions:

1. Please read this scenario prior to answering the question
You are employed as an Enterprise Architect working at a vehicle manufacturing company. The company specializes in buses and coaches. You are part of an Enterprise Architecture (EA) team that has responsibilities across multiple divisions of the company. EA provides the company with a comprehensive framework to develop and manage their manufacturing infrastructure, processes for component production, and design and testing systems.
The company has a corporate strategy that focuses on switching to electric power for its vehicles. It has invested heavily in a new standardized design, production efforts, and major components to use across all its product range. The company has multiple manufacturing plants in North America, Europe, and in Asia.
Customer demand has caused a backlog of orders because many customers want to have more environmentally friendly public transportation. There are not enough electronic components available, which is making it hard to produce products and meet customer demand. To address this issue, the company has started making the battery packs themselves and has hired new suppliers.
The EA team is working on a project to improve the process and systems to design, produce, and test the battery pack. As part of putting the new battery pack into production, changes to the assembly processes need to be made. A trial has been completed at a single location. The Chief Engineer, sponsor of the project, and the Architecture Board have approved the plan to roll out these changes to all plants.
Preliminary Architecture Contracts are being developed to detail the work needed to put in place the new processes for each location. The EA team leader has called a meeting to discuss the contracts. It is emphasized that the Architecture Contract will serve as the key connection between architecture and implementation organizations.
The company mixes internal teams with a few third-party contractors at the locations.
The Chief Engineer is worried that the implementation and deployment will not be consistent and of satisfactory quality.
The company has an established EA practice. It uses the TOGAF standard as the foundation for its work including the internal EA framework. Additionally, the company uses various management frameworks such as business planning, project management, and operations management.
Refer to the scenario
The EA team leader asks you how you would address the Chief Engineer ' s concern.
Based on the TOGAF standard, which of the following is the best answer?

A) The contracts must be checked to ensure they can be used to direct andcontrol the implementation teams. For contracts issued to third-partycontractors, they must be enforceable legal contracts. For internaldevelopment teams, a memorandum of understanding with the ArchitectureBoard is needed.
The Architecture Board must review all deviations from theArchitecture Contract and decide whether to grant a dispensation to allow theimplementation organization to customize the process to meet their localneeds.
B) The contracts must be used to manage the architecture governance processesacross the locations.Monitoring tools must be put in place to assess theperformance of each completed battery pack at each location. If a deviationfrom the contract is needed, the Architecture Board should allow theArchitecture Contract to be modified for the location. In such cases they shouldissue a new Request for Architecture Work to implement a modification to theArchitecture Definition.
C) The contracts must be checked to ensure they have flexibility. For changesundertaken by internal teams, a memorandum of understanding between theArchitecture Board and the implementation organization is needed. If acontract is issued to a contractor, it must be a fully enforceable legal contract. Ifa deviation from the Architecture Contract is found, the Architecture Boardmust grant a dispensation to allow the implementation organization tocustomize the process to meet their local needs.
D) The contracts must specify goals, measures, acceptance terms, and risks.Third-party contracts must be legally enforceable. It is advisable to establish aschedule of compliance reviews at key points in the implementation process.The Architecture Board must review all deviations from the ArchitectureContract and consider whether to grant a dispensation to allow the process tobe customized for local needs. Ensure that all dispensations are time-boundrather than indefinite.

2. Scenario
You are working as an Enterprise Architect within an Enterprise Architecture (EA) team at a global company that sells consumer products. The company produces many products that buyers use and enjoy.
The company has announced a major change to its products that will occur over a four-year period. This change includes the introduction of digital products and services. An architecture to support this strategy has been finished, along with a roadmap for a set of projects to implement this significant change. This will be a cross-functional effort between the product design and software teams. It is planned to be developed in phases.
The company faces a challenge in presenting and providing access to different services through its products and digital platforms while ensuring compliance with data privacy laws. In some countries and regions, the data residency requirements mean that the company has to store certain data within the region where it is collected. As a result, the company's application portfolio and infrastructure must connect with various cloud services and data repositories in different countries.
The EA team has inherited the architecture used by the current products, some of which can be carried over to the new products. The EA team has started to define which parts of the architecture to carry forward. Enough of the Business Architecture has been defined so that work can commence on the Information Systems and Technology Architectures. Those architectures need to be defined to support the key digital services that the company plans to provide.
The company uses the TOGAF Standard as the foundation for its Enterprise Architecture framework, and architecture development follows the purpose-based EA Capability model outlined in the TOGAF Series Guide: A Practitioner's Approach to Developing Enterprise Architecture Following the TOGAF ADM. The EA team reports to the Chief Information Officer (CIO), who oversees the program.
You have been asked how to decide and organize the work to deliver the requested architectures.
Based on the TOGAF standard, which of the following is the best answer?

A) You commence an iteration of ADM Phase A, identifying the stakeholders and revising the Architecture Vision. You perform a Stakeholder Analysis and update the Stakeholder Map. You conduct workshops and interviews to reflect the stakeholders who are now the key drivers for the digital products and services. You coordinate with the CIO to ensure alignment with the overall roadmap and update the Implementation and Migration Plan accordingly.
B) You look outside the company to study how other companies organize their data models and application portfolios. You create just enough architecture description for the Application, Data, and Technology Architectures to identify the different options. For each project, this includes identification of candidate architecture and solution building blocks. You then identify solution providers, perform a readiness assessment, and assess the viability and fitness of the solution options. You then write the draft Implementation and Migration plan.
C) You research leading data companies, using your findings to help in developing high-level Target Data, Application, and Technology Architectures. You review the Architecture Vision to determine the level of detail, time, and scope of the ADM cycle phases required for each project. You identify and estimate the cost of the main resources. You then prepare an Architecture Roadmap and request the Architecture Board to review the roadmap. You then start the project.
D) You refer to the superior architecture for guidance. You review the projects identified, their dependencies, and synergies, then decide the sequence for starting the projects. You develop high-level architecture descriptions. For each project, you determine how much work is needed, identify reference architectures, and candidate building blocks. You identify the resource needs taking into account cost and value. You document the different options, risks, and ways to control them to enable feasibility analysis and trade-off with the stakeholders.

3. Please read this scenario prior to answering the question
You are employed as an Enterprise Architect within a large company that operates globally. The company has bought several other companies in the past ten years. This has resulted in a growing number of manufacturing divisions in different locations and a complicated supply chain.
Senior management recently expressed concerns about the company ' s effectiveness because of its multiple data centers and duplicate applications. The EA team has been working on a project to solve this issue. An analysis shows that supply chain issues have led to not enough products being produced to meet all the customer demand.
A strategic architecture has been defined to help meet customer demand and manage the supply chain more effectively. The strategic architecture involves combining different planning applications that are currently used separately in the company's production sites.
Each division has finished the Architecture Definition documentation to address their own specific manufacturing needs. The Enterprise Architects have agreed an overall strategy for the migration. They have defined a set of work packages that address the gaps found. They have defined the intermediate architectural states between the Baseline and Target architecture to add a new planning application environment into the company.
Because of the risks posed by this change from the current environment, the architects have recommended that a phased approach should be taken to implement the target architecture with several stages of change. The entire implementation process is estimated to take over two years.
The company has an established Enterprise Architecture (EA) practice and follows the TOGAF Architecture Development Method. The company also uses various management frameworks such as business planning, project/portfolio management, and operations management. The EA program is sponsored by the Chief Information Officer (CIO). In your role as an Enterprise Architect within the EA team, you work closely with the important stakeholders from the various divisions within the company.
Refer to the scenario
You have been assigned to plan the next steps for the migration. Which approach will you choose?
Based on the TOGAF standard which of the following is the best answer?

A) You estimate the business value for each project by applying the Business Value Assessment Technique to prioritize the implementation projects and project steps. The assessment should focus on return on investment and criteria for evaluating performance to track the progress of the architecture transformation. You would confirm and plan a series of Transition Architecture phases using a table of Architecture Definition Increments that lists the projects.
B) You conduct a Compliance Assessment to check that the architecture is being implemented as required by the contract. This will confirm that the implementation team is following the Architecture Requirements Specification during implementation. This involves using monitoring tools and making sure that performance targets are being achieved. If the targets are not being met, you would then need to make adjustments to the performance requirements and update the Implementation and Migration Plan.
C) You update the Architecture Definition Document, which includes setting project objectives and documenting the final requirements. This makes sure that the architecture stays relevant and flexible to the needs of the enterprise. You would identify the needed resources to undertake the development projects. You would then produce an Implementation Governance Model to manage the lessons learned before finishing the plan. You suggest that the lessons learned be immediately applied as changes to the architecture.
D) You need to find out how the Implementation and Migration plan fits with the other frameworks currently in use within the organization. You make sure that the plan is aligned with the enterprise ' s approach to managing and implementing change in the enterprise ' s overall change portfolio. You assign a value to each work package, considering the resources available and how they fit into the overall strategy. Using these work packages, you select which projects will be included in the Implementation and Migration Plan.

4. You are working as an Enterprise Architect within the Enterprise Architecture (EA) team at a healthcare and life sciences company. The EA team is developing a secure system for researchers to share clinical trial information easily across the organization and with external partners.
Due to the highly sensitive nature of the information, each architecture domain must consider privacy and safety concerns. The healthcare division has been directed to minimize disruptions to clinical trials while introducing the new system gradually.
How would you identify the work packages for introducing the new system? Based on the TOGAF standard, which of the following is the best answer?

A) Use a Consolidated Gaps, Solutions, and Dependencies Matrix to classify each solution, group them into work packages, then regroup into Capability Increments. Document in an Architecture Definition Increments Table.
B) Use a Consolidated Gaps, Solutions, and Dependencies Matrix to create work packages and sequence them into Capability Increments. Document in a Transition Architecture State Evolution Table.
C) Draw up an Implementation Factor Catalog to indicate actions and constraints. Use a Consolidated Gaps, Solutions, and Dependencies Matrix, then group similar activities into work packages and identify dependencies.
D) Identify Solution Building Blocks for development or procurement, then use a CRUD matrix to rank and select the most cost-effective work packages. Schedule the rollout sequentially across regions.

5. Please read this scenario prior to answering the question
You have been appointed as Chief Enterprise Architect (CEA). reporting to the Chief Technical Officer (CTO), of a company established as a separate operating entity by a major automotive manufacturer. The mission of the company is to build a new industry leading unified technology and software platform for electric vehicles.
The company uses the TOGAF Standard as the basis for its Enterprise Architecture (EA) framework, and architecture development follows the purpose-based EA Capability model as described in the TOGAF Series Guide: A Practitioners ' Approach to Developing Enterprise Architecture Following the TOGAF ADM.
An end-to-end Target Architecture has been completed with a roadmap for change over a five-year period.
The new platform will be a cross-functional effort between hardware and software teams, with significant changes over the old platform. It is expected to be developed in several stages over three years. The EA team has inherited the architecture for the previous generation hardware and software automotive platform, some of which can be carried over to the new unified platform. The EA team has started to define the new platform, including defining which parts of the architecture to carry forward.
Enough of the Business Architecture has been defined, so that work can commence on the Information Systems and Technology Architectures. Those need to be defined to support the core business services that the company plans to provide. The core services will feature an innovative approach with swarm data generated by vehicles, paving the way for autonomous driving in the future.
The presentation and access to different variations of data that the company plans to offer through its platform pose an architecture challenge. The application portfolio and supporting infrastructure need to interact with various existing cloud services and data- Refer to the scenario You have been asked what approach should be taken to determine and organize the work to deliver the requested architectures?
Based on the TOGAF standard which of the following is the best answer?

A) You would look outside the enterprise to research data models and application portfolios of leading big data businesses. You would develop just enough applications, data, and technology architecture to identify options. For each project this should include identification of candidate architecture and solution building blocks. You will identify solution providers, perform a readiness assessment, and assess the viability and fitness of the solution options. You will then document the draft Implementation and Migration plan.
B) You will research leading data businesses, developing high-level Target Data, Application and Technology Architectures. You would review the Architecture Vision in order to estimate the level of detail, time, and breadth of the ADM cycle phases that will be needed to develop the architecture. You will identify and cost major work packages, and then develop an Architecture Roadmap. You would then seek approval by the Architecture Board and initiate the project.
C) You would refer to the end-to-end Target Architecture for guidance and direction. The first objective should be to identify projects, dependencies and synergies, then prioritize before initiating the projects.
You will develop high-level architecture descriptions. For each project you would estimate effort size, identify reference architectures, and candidate building blocks. You will identify the resource needs considering cost and value. You will document options, risks, and controls to enable viability analysis and trade-off with the stakeholders.
D) You will revisit ADM Phase A. identifying the stakeholders and creating a new Architecture Vision.
You will update the Stakeholder map produced for the strategic architecture so it reflects the stakeholders who are now the most relevant to the projects that are to be developed. You would then ask the CTO to make some decisions about the Architecture Roadmap, and update the Implementation and Migration Plan to reflect the decisions.

Solutions: