Juniper JN0-104 Real Exam Questions Test Engine Dumps Training With 145 Questions
JN0-104 Actual Questions Answers PDF 100% Cover Real Exam Questions
NEW QUESTION # 61
Click the Exhibit button
Referring to the exhibit, which statement is correct?
- A. Traffic destined to 10.10.102.0/30 will be silently dropped.
- B. Traffic destined to 10.10.102.0/30 will be load-balanced across both next hops.
- C. Traffic destined to 10.10.102.0/30 will be forwarded to 10.10.4.2
- D. Traffic destined to 10.10.102.0/30 will be forwarded to 10.10.101.1.
Answer: C
NEW QUESTION # 62
Which two CLI commands allow you to move between different configuration hierarchies? (Choose two.)
- A. cd
- B. move
- C. up
- D. edit
Answer: C,D
NEW QUESTION # 63
Which command correctly sets a Junos device's date and time?
- A. user@host> set system time 199708290900.00
- B. user@host# set date 199708290900.00
- C. user@host# set system time 199708290900.00
- D. user@host> set date 199708290900.00
Answer: D
NEW QUESTION # 64
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The last 5 second CPU utilization is 1%.
- B. The data plane memory used is 63%.
- C. The last 5 second CPU utilization is 99%.
- D. The control plane memory used is 63%.
Answer: A,D
NEW QUESTION # 65
Which command initiates a loopback on a Gigabit Ethernet interface ge-0/0/0?
- A. user@host> loopback ge-0/0/0
- B. user@host> set interfaces ge-0/0/0 loopback
- C. user@host# set interfaces ge-0/0/0 unit 0 loopback
- D. user@host# set interfaces ge-0/0/0 gigether-options loopback
Answer: D
NEW QUESTION # 66
Which two parameters are determined during PPP LCP negotiation? (Choose two.)
- A. antireplay detection
- B. authentication protocol
- C. MRU
- D. connection speed
Answer: B,C
NEW QUESTION # 67
Which two statements describe the functions of the Routing Engine (RE)? (Choose two.)
- A. The RE will process management traffic to help monitor and manage the network device.
- B. The RE will apply filters and routing policies when forwarding the packets to their final destination.
- C. The RE will calculate the best network path to each individual subnet based on input from various routing protocols and static routes.
- D. The RE will route or switch packets or frames out of the correct interface as quickly as possible.
Answer: A,C
NEW QUESTION # 68
Which of these methods can be used to apply a firewall filter that controls SSH, HTTP and Telnet access through any interface?
- A. Apply the firewall filter as an outbound filter on interface lo0
- B. Apply the firewall filter as an inbound filter on interface lo0
- C. Apply the firewall filter as an outbound filter on interface fxp0
- D. Apply the firewall filter as an inbound filter on interface fxp0
Answer: B
NEW QUESTION # 69
Which of these is responsible for handling transit traffic?
- A. RE only
- B. PFE only
- C. Both RE and PFE
- D. Neither RE, not PFE
Answer: B
NEW QUESTION # 70
When troubleshooting ATM, which command would allow you to test reachability from one side of an ATM cloud to the other?
- A. ping atm vci 0.100 interface at-0/1/0 final-hop
- B. ping atm vci 0.100 interface at-0/1/0 far-end
- C. ping atm vci 0.100 interface at-0/1/0 circuit
- D. ping atm vci 0.100 interface at-0/1/0 end-to-end
Answer: D
NEW QUESTION # 71
Which statement is true about using custom login class permissions?
- A. If you allow and deny the same command, Junos OS will randomly choose the action.
- B. If you allow and deny the same command, the command is allowed.
- C. If you allow and deny the same command, the command is denied.
- D. If you allow and deny the same command, the Junos OS will fail the commit check.
Answer: B
Explanation:
Understanding the Allow and Deny Statement Precedence and Matching By default, the allow-commands and allow-configuration regular expressions take precedence over deny-commands and deny-configuration expresssions. Thus, if you configure the same command for both the allow-commands and deny-commands statements, then the allow operation takes precedence over the deny operation.
Ref: User Access Privileges | Junos OS | Juniper Networks
"User Access Privileges
...
Understanding the Allow and Deny Statement Precedence and Matching
By default, the allow-commands and allow-configuration regular expressions take precedence over deny-commands and deny-configuration expresssions. Thus, if you configure the same command for both the allow-commands and deny-commands statements, then the allow operation takes precedence over the deny operation.
..,."
NEW QUESTION # 72
Exhibit:
While working on a Junos Device, you receive the message shown.
In this scenario, what would you do to stop the shutdown process?
- A. Issue the clear system reboot command
- B. Issue the request system power-off in command
- C. Issue the request system halt in command
- D. Issue the clear system commit command
Answer: A
NEW QUESTION # 73
Which command is used to define a router's host-name?
- A. # set ip host-name <name>
- B. > set system host-name <name>
- C. > set ip host-name <name>
- D. # set system host-name <name>
Answer: D
NEW QUESTION # 74
Which command displays the output shown in the exhibit?
- A. show chassis temperature-thresholds
- B. show chassis hardware
- C. show chassis alarms
- D. show chassis environment
Answer: D
NEW QUESTION # 75
What is the default import routing policy for OSPF?
- A. Accept all OSPF routes and install them into the inet7.0 routing table.
- B. Accept all OSPF routes and install them into the inet.3 routing table.
- C. Accept all OSPF routes and install them into the inet.0 routing table.
- D. Accept all OSPF routes and install them into the inet4.0 routing table.
Answer: C
NEW QUESTION # 76
Click the Exhibit button
Referring to the exhibit, what will happen to traffic that is less than the bandwidth limit from source address 1.0.0.207
- A. The traffic will be discarded by term 1.
- B. The traffic will be accepted by term 1.
- C. The traffic will be accepted by term 2.
- D. The traffic will be discarded by the policer.
Answer: B
NEW QUESTION # 77
What is the default route preference for OSPF internal?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 78
Referring to the exhibit,
which command will cause this event message?
- A. request system logout
- B. request system halt
- C. request system recover
- D. request system commit
Answer: B
NEW QUESTION # 79
You are connected to your Junos device using an SSH connection to the txp0 interface. No other interfaces are currently configured and unreachable from your management network.
How would you reestablish communication with the device?
- A. Establish a SSH connection to the loopback interface
- B. Power off and power on the device
- C. Connect to the console of the device
- D. Unplug the network cable and plug it back in
Answer: C
NEW QUESTION # 80
Which output displays that the peer has been selected for NTP synchronization?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION # 81
Which two interfaces are considered physical interfaces? (Choose two.)
- A. xe-10/2/1
- B. et-7/1/4.0
- C. ge-0/0/0
- D. et-3/0/0/0:0.501
Answer: A,C
NEW QUESTION # 82
Which two configuration commands are required to use RADIUS as the user authentication method? Choose two.
- A. Top set system radius-server 10.10.10.10 secret useme
- B. Top set system login users radius
- C. Top set system authentication-order radius
- D. Top set system login radius-server 10.10.10.10 secret useme
Answer: A,C
NEW QUESTION # 83
......
BraindumpsPrep JN0-104 Exam Practice Test Questions: https://passleader.briandumpsprep.com/JN0-104-prep-exam-braindumps.html
