[Nov-2021] JN0-104 Exam Dumps - Free Demo & 365 Day Updates
Free Sales Ending Soon - Use Real JN0-104 PDF Questions
NEW QUESTION 41
What is the initial prompt displayed when logging in as the root user?
- A. root@router%
- B. root@router*
- C. root@router>
- D. root@router#
Answer: A
NEW QUESTION 42
A Junos device is in a factory-default configuration and no host name is set.
What is used in place of a host name in this scenario?
- A. Junos
- B. user
- C. router
- D. amnesiac
Answer: D
NEW QUESTION 43
What is the purpose of the load merge command?
- A. to completely overwrite the current configuration with the configuration you load.
- B. to look for a replace tag in the configuration you load.
- C. to add or delete variables from the configuration based on the contents of a specified path file.
- D. to combine the current configuration with the configuration you load.
Answer: D
NEW QUESTION 44
Which command allows you to verify the syntax and consistency of your configuration without actually activating your configuration?
- A. check commit
- B. commit verify
- C. User Interfaces
- D. commit check
- E. commit no-activate
Answer: D
NEW QUESTION 45
Which two platforms are supported in physical and virtual form factors? (Choose two.)
- A. MX Series
- B. SRX Series
- C. NFX Series
- D. ACX Series
Answer: A,B
NEW QUESTION 46
What configuration parameter on a Junos device modifies the default next-hop resolution behavior of a static route?
- A. Resolve
- B. No-readvertise
- C. Passive
- D. Preference
Answer: A
NEW QUESTION 47
Which logical interface is able to forward IP traffic?
- A. Ge-0/0/0
- B. Ge-0/0/2.0
- C. Ge-0/0/2
- D. Ge-0/0/1.0
Answer: B
NEW QUESTION 48
Click the Exhibit button.
What is the next hop for a packet destined to 192.168.80.98 as shown in the exhibit?
- A. 172.25.11.254
- B. 172.18.6.1
- C. 172.18.7.1
- D. 192.168.11.2
Answer: C
NEW QUESTION 49
Exhibit:
While working on a Junos Device, you receive the message shown.
In this scenario, what would you do to stop the shutdown process?
- A. Issue the request system halt in command
- B. Issue the clear system commit command
- C. Issue the clear system reboot command
- D. Issue the request system power-off in command
Answer: C
NEW QUESTION 50
What statement is true about the orlonger route-filter match type?
- A. All routes within the specified prefix that are longer or equal to the given prefix are considered a match
- B. All routes within the specified prefix that are longer than the given prefix up to a defined acceptable prefix length are considered a match
- C. All routes within the specified prefix that are longer than the given prefix are considered a match
- D. All routes within the specified prefix that are longer or equal to the given prefix up to a defined acceptable prefix length are considered a match
Answer: C
NEW QUESTION 51
You have received a request from the user, SecurityTeam, to notify their terminal connection only when someone commits a change to the configuration of a specific networking device.
Which command would you input in this scenario?
- A. set system syslog user SecurityTeam change-log alert
- B. set system syslog user SecurityTeam interactive-commands any
- C. set system syslog user SecurityTeam change-log any
- D. set system syslog user SecurityTeam interactive-commands
Answer: C
NEW QUESTION 52
You are in configuration mode at the top of the hierarchy.
How would you save your configuration to a file on the router?
- A. save run <filename>
- B. save <filename>
- C. save configuration <filename>
- D. save config <filename>
Answer: B
NEW QUESTION 53
You are considering to upgrade from 19.1R1 and want to ensure that only bug fixes are included.
Which two software versions should you use in the current situation? Choose Two
- A. 19.3R2
- B. 19.3R1-S1
- C. 19.1R3
- D. 19.1R1-S2
Answer: C,D
NEW QUESTION 54
What does the output of the show route forwarding-table command display?
- A. The Routing Engine's forwarding table
- B. The routing protocol databases in the Routing Engine
- C. The inactive entries in the Routing Engine's routing table
- D. The Packet Forwarding Engine routing table
Answer: D
NEW QUESTION 55
Click the Exhibit button.
Referring to the exhibit, which logical interface is able to forward IP traffic?
- A. ge-0/0/2
- B. ge-0/0/2.0
- C. ge-0/0/0
- D. ge-0/0/1.0
Answer: D
NEW QUESTION 56
Which parameter would you use to prohibit the redistribution of a static route used for management traffic?
- A. no-readvertise
- B. reject
- C. discard
- D. passive
Answer: A
NEW QUESTION 57
A Junos device is configured with multiple routing protocols to the same destination prefix.
By Default, which route will be active in the forwarding table?
- A. A static route
- B. An OSPF route
- C. A BGP route
- D. An IS-IS route
Answer: A
NEW QUESTION 58
Which two statements describe PFE functions are true?
- A. The PFE stores a local copy of the layer 2 and layer 3 forwarding tables
- B. The PFE stores the master copy of the layer 2 and layer 3 forwarding tables
- C. The PFE provides access to the CLI and Jweb
- D. The PFE implements rate limiting using policers
Answer: A,D
NEW QUESTION 59
How would you change the display so that 40 lines will be displayed in the terminal program when you are logged into a junos device?
- A. Set the display options in your terminal program
- B. Issue that set cli screen-length 40 command from operational mode
- C. Set the window size of your terminal program
- D. Issue that set cli screen-length 40 command from Configuration mode
Answer: B
NEW QUESTION 60
Which two keystrokes will auto-complete a command? (Choose two.)
- A. End
- B. Esc
- C. Tab
- D. Spacebar
Answer: C,D
NEW QUESTION 61
What are two services performed by the Packet Forwarding Engine? (Choose two.)
- A. to handle processes that control the device's Interfaces
- B. to process transit traffic
- C. to maintain the routing tables
- D. to implement stateless firewall filtering
Answer: B,D
NEW QUESTION 62
What is the maximum number of rollback files a Junos device can store?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 63
What are two examples of transit traffic? (Choose two.)
- A. SFTP traffic that enters and exits the same interface on the local router.
- B. SCP traffic that is destined for the router's loopback interface.
- C. SFTP traffic that enters one interface and is destined for another interface on the local router
- D. SCP traffic that enters one interface and exits another interface on the local router.
Answer: B,C
NEW QUESTION 64
......
JN0-104 Dumps - Pass Your Certification Exam: https://passleader.briandumpsprep.com/JN0-104-prep-exam-braindumps.html
